Excessive Industries Front and Rear NBO Bumper Prep and Paint - Pre Installation

🔔 Please CLICK THE BELL if you want to see my videos! 🔔 [ OVERCLOCK3D Jeeps | https://o3djeeps.com ] Music: Ninjula - Livewire http://www.excessiveindustries.com/st... =========================================== Jeep JK and JKU NBO Series Mid Width Front Bumper Designed to be a perfect match to our popular High Clearance Rear Bumper, this one has it all! Our bumpers offer Hi Lift jacking points on each corner that are strong enough to lift your Jeep completely off the ground. They are built into our one of a kind, high clearance corners. These corners are designed to give you the protection you want, and the ground clearance that you need to take on even the toughest trails. Built from 3/16 plate steel, they are also made to last. Fully boxed and gusseted corners offer superior strength compared to our competition. Available with either a stinger or a bull bar, you can customize this bumper to your liking. Other options include the winch tray, as well as the lower light enclosure. Mount up to a 20’’ light bar or a total of 4 pods. This mounting location keeps the light down low where you need it, and is strong enough to protect them. It does require the removal of the factory crash bar to be able to utilize the light enclosure, but this makes it possible to gain approach angle and ground clearance over the factory set up! ​NBO- Nearly Bolt On! This means there are no major modifications to run this series! You can easily switch to something else down the road, or even back to stock! Please note that if you add the lower light enclosure, removal of the factory crash bar is necessary. All necessary grade 8 mounting hardware included! =========================================== Jeep JK and JKU NBO Series Rear Mid Width Bumper Simply stated, this bumper is extremely unique. From its appearance to its functionality, it is designed for the highest possible ground clearance along with the best possible departure angle without any major frame modification. This bumper fits snug to the back of your Jeep and the design compliments the look of your Jeep JK or JKU. Our bumper also provides you with the ability to still tow a trailer with your Jeep! With a towing capacity of 3,500 lbs, it can handle just as much as your Jeep can. Just remember to never exceed your vehicle manufacture towing capacity! Designed with our one of a kind high clearance corners, this bumper gives you the protection and strength you want, with the ground clearance you need to take on even the toughest obstacles. It is truly a hybrid between a stubby and a mid width bumper. Built from 3/16” steel plate, and mounted to your Jeep by 1/2” steel plate, our bumpers are built to last. We’ve also built in a Hi Lift jacking point into each corner of the bumper, making your Hi Lift jack easier and safer to use. And with the strength to lift the entire corner of your Jeep off the ground, it also makes for quicker and easier recoveries! For a finishing touch, we also include the cut outs for any flush mount led pods! ​​NBO- Nearly Bolt On! This means there are no major modifications to run this series! You can easily switch to something else down the road, or even back to stock! If its a true Stubby rear bumper your looking for, be sure to check out the gallery for more photos! And of course, feel free to contacted us with any questions you may have! All necessary grade 8 mounting hardware is included. Some helpful O3D Jeeps links for you: Most Recent Upload : https://goo.gl/z2AFkB Most Popular Upload : https://goo.gl/y6bCWo Check out my Channel : https://goo.gl/t8crvN