Shower Enclosure Installation - Enna Shower Enclosure Fitting | Jaquar

Shower enclosures can be the perfect choice when it comes to marrying luxury with safety. This enclosure serves the best purpose as a shower cabin if you are looking for a separate wet corner for your shower installation. It reduces the chances of accidents and ensures hygiene in your shower space. To enhance the elegance of your bathroom, Jaquar has designed shower enclosures that look and feel premium making your bathroom look like a statement of luxury. The sliding glass shower doors make it simply easy to operate without any hassle and much effort. Also Read: https://www.jaquar.com/en/GuideDetail... Installing a shower cabin may look like a tedious task. That’s why Jaquar has got you covered. Since we care about our customer’s needs, we have made it easy for you to install shower enclosures. You can follow the steps by watching the video or by reading them below. Before installation, make sure that there's a 0mm level difference in the floor. If the difference is not 0 mm then fix it at first. The Enna glass shower comes in several dimensions such as: 900mm x 900mm 1000mm x 1000mm 1000mm x 1200mm 1200mm x 1200mm Here are the steps to be followed for Jaquar Enna Glass Shower Enclosure Installation: 1) Mark the measurement as per the dimensions of the shower enclosures. 2) Now drill the hole in the glass frame and tighten the screws in it with the help of a screwdriver 3) Now continue the frame-fitting process 4) Mark the points of the panel with a pencil by placing them on the wall 5) Now drill the hole on the marked points on the wall 6) Now insert the nylon plug in the drilled hole and tighten the screws on the wall 7) Now take the glass and fix it on the wall 8) Now remove the stopper from the glass stick 9) Fix all 8 roller holders Check out Jaquar’s Archimede Steam Cabin (Corner): https://www.jaquar.com/en/steam-cabin... 10) Now place all the glasses and fix all the enclosures 11) Drill the hole at the stopper point and fix all the stoppers with the help of a screwdriver 12) Take the handle parallelly on both sides of the glass and tighten it with the L-key 13) Now, repeat the same procedure on the other glass too 14) Tighten all the roller holders with the help of a spanner 15) Drill the two holes on the wall-side glass frame 16) Fix the stopper by placing the cover on them and rotating them 17) Now place the supporter on the other side of both the glasses Our durable shower enclosures are installed and ready to serve as your exquisite shower cabin. Move those sliding glass shower doors and enjoy the bath of your dreams! Visit our website: https://www.jaquar.com/en/ To find more about bathroom solutions, subscribe to our youtube page:    / jaquarindia   #showerenclosures #slidingglassshowerdoors #showercabin