Air Lift LoadLifter 7500 XL Ultimate Rear Air Helper Springs Install - 2026 Ford F-350 Super Duty

Click for more info and reviews of this Air Lift Vehicle Suspension: https://www.etrailer.com/Vehicle-Susp... Check out some similar Vehicle Suspension options: https://www.etrailer.com/suspension-e... Search for other popular Ford F-350 Super Duty parts and accessories: https://www.etrailer.com/vehicle/2026... https://www.etrailer.com Don’t forget to subscribe!    / etrailertv   Full transcript: https://www.etrailer.com/tv-install-a... Hi, this is Scott with etrailer. Today we're taking a look at and installing our Air Lift LoadLifter 7,500 XL on our 2026 Ford F-350. What our Air Lift AirHelper Springs are gonna do for us is say we have a heavy trailer on or we have a lot of weight in the back of our truck and the truck starts to squat in the rear and it's gonna lift up the front. What that's gonna do is it's gonna make your headlights point up and make it a little harder to see. What your airbags will do for you is you can level that out and get your front end back to where it's supposed to be. So your headlights are tracking down the road where they're supposed to be. Also, it's gonna help with braking because it's leveling out your vehicle back to its factory size or lift where it's supposed to be. So that's gonna really help with handling as well, when you're going down the road, say you're pulling a trailer, it's gonna really help prevent a lot of sway and heavy loads in the back, if you're a contractor, airbags are really helpful 'cause most of the time you're driving around all day with a bunch of heavy stuff in the back and it's really a lot better for the suspension of your truck to have that help, from the air springs. This is what our airbags are gonna look like fully installed and as you can see it's a really clean look and it's just gonna replace your jounce bumpers that are up top here. And this is gonna allow you to have the ability to level out your truck when you have heavy loads in the back or you have a heavy trailer on. So these are a really nice option. This one's set up for dual path, so you're gonna have an option to either set this one a little lower than this one or vice versa. Say you have heavy loads in the back, maybe you have a heavy toolbox on one side, not on the other. That's gonna allow you to level it out, not only up and down but from side to side. Now these are gonna be rated for 7,500. Now keep in mind these are basically just gonna be used to help level out your truck. These are not gonna increase the payload capacity of your truck at all. This is just kind of there to be a backup and help you get leveled out. If you have any questions about this airbag setup for your F-350, you can always leave a question or comment down below in the comment section or you can get a hold of one of our experts here at etrailer, they'd be glad to help you out. As far as installation goes, this really isn't too bad to do. It's something you could definitely do. It's a little bit tricky sometimes just in the space, especially on the driver's side. You could definitely get it done yourself. If it's something you don't have time to do yourself, you really don't have the tools or the space to do it, you can always take a look at our dealer locator and get something done for you locally. If it's something you feel like tackling yourself, stick around, watch our video. I'm gonna help you get it installed. To start our installation, we went ahead and got our spare tire out of the way. That way we have a little more room to work and it's also gonna allow you guys to see a little bit better up in here. So our first step, what we want to do is we're gonna have our bump stop underneath above our axle. It's about bolted right to our frame here and we're gonna have two 15 millimeter nuts. We just want to get those backed off and we can remove our bump stop. As you can see here, we have our truck on a lift and we do have a transmission jack lifting up the back of it that's separating the body from the rear axle. So it's giving us a little more room in there. If you're doing it at home, you're doing it on the ground, you can use a floor jack and just use that to give you a little bit more room in there. And another thing it's gonna do is it's gonna give it room. So when you go to put your bags in place, you'll have enough room to put those in there. Now underneath here we're gonna have these clips that hold our bolts in. I like to take a screwdriver and just get those to pop down. And to get those popped out, slide that back and pull those outta the way. In our kit, we're gonna have these clips and these are gonna slide up into the frame where we just removed our factory clips. When we get these up in here, what we want to do is pop thes