Part 1: Hefty Hoist Dump Kit Measurements

⏱️ Timestamps 0:00 – Intro: 5T Dump Kit Install Overview (Chevy Chassis, 60" Cab-to-Axle, 10' Bed) 0:39 – Why Shorten the Chassis & Cutting Tips (45° Angle, No Forward Welding) 1:09 – Rear Hinge Placement & Taillight Clearance 2:00 – Scissor Assembly Positioning (5'8"–6'6" Range, Fuel Tank Hose Clearance) 2:19 – Optimal Scissor Measurement (5'11.5" for Lift Height vs Capacity) 3:52 – Bed Height & Fuel Filler Hose Clearance Rules (9.5–10" Target) 5:27 – Crossmember Modifications & L-Bracket Setup 6:15 – Front Frame Hinges & Spacing (2.5" Target, Bed Rail Specs) 7:39 – Final Measurement Checks & Lowest Position Clearance 8:30 – Key Warnings & Next Steps (Parts 2 & 3) This is part one of a three-part installation series of the PIERCE 5T dump bed kit on a Chevy chassis. This video shows the primary measurements installers must consider before getting started. Take time to double-check all measurements to ensure proper installation. This installation video can be used when installing a 7.5T. The main difference between each kit is the lift angle, overhang and length of the bed. 5 - 7.5T kits are compatible with 8' - 12' beds. Read your manual for further instructions. NOTE: DO NOT reverse the kit or lower it all the way down in the frame. BUY NOW: https://www.piercearrowinc.com/produc... VIEW MANUAL: https://www.piercearrowinc.com/pages/... PIERCE Dump Bed Kits 940-538-5643 Henrietta, Texas Since 1976