Полив из бочки БЕЗ НАСОСА

➤ Need to water your garden beds, trees, or shrubs from a rain barrel, but don't have a pump? In this video, I demonstrate a brilliant, folksy method—a homemade pump made from a plastic bottle and a hose that operates without electricity or any manual intervention. Just turn it on, and you're ready to go. ➤ The design is simple: cut a hole in a plastic bottle (similar to a bird feeder, only upside down). The bottle is connected to a hose through a nipple. The bottle is filled with water, air bubbles are released, and water begins to flow vigorously out the other end of the hose. The device is placed in the barrel and operates by gravity until the barrel is empty. The watering rate depends on the thickness and length of the hose, as well as the height of the barrel. I share secrets on how to improve the design for greater pressure. 🔹 In this video: • Demonstration of a homemade pump made from scrap materials. • Step-by-step instructions: how to make a bottle with a cutout and connect it to a hose. • How to properly start the pump: fill the bottle, wait for the bubbles to emerge. • Why water starts flowing without a pump (the physics of the process). • What determines watering intensity: the thickness and length of the hose, the height of the barrel. • How to use: under a tree, shrub, or in a garden bed. • Tips for improvement: a larger bottle, a thinner and shorter hose, a taller barrel. ⏱️ Extended timestamps: 0:00 - Demonstration of a traditional method for watering from a barrel without a pump 0:08 - You can start the pump and go about your business 0:20 - The design of a homemade pump: a plastic bottle with a cutout (like an upside-down bird feeder) 0:30 - Connecting the bottle to the hose with a nipple 0:40 - The hose is long (30 meters), it won't produce enough pressure for a fountain, but it's enough for watering 0:50 - Starting the pump: Place the bottle in water and fill it 1:00 - Wait for the air bubbles to escape 1:10 - Water begins to rapidly drain from the bottle - this is a signal that the pump is working 1:20 - Place the bottle in the barrel; it floats upright 1:26 - Water starts to flow from the other end of the hose: Direct it under a tree, bush, or garden bed 1:35 - The intensity of the watering depends on the thickness of the hose: The thinner the hose, the more intense the water flow 1:45 - The shorter the hose, the higher the pressure 1:55 - The higher the barrel, the greater the pressure 2:05 - The pump operates autonomously until the barrel is empty 2:22 - Possible improvements: larger bottle, thinner and shorter hose, elevated barrel 2:35 - Conclusion: Thank you for your attention, happy watering ➖➖➖➖➖➖➖ 🔺 Collaboration: [email protected] ❗Attention! All channel materials are for informational purposes only and do not constitute a call to action. ✳️ Additional information in the channel description. ➖➖➖➖➖➖➖ #pumplesswatering #homemadepump #wateringbarrels #dacha #lifehack #DIY #savings #garden #electricitylesspump #masterhouse 👉 Subscribe to the channel to stay up-to-date with new dacha lifehacks:    / @mactephouse   👍 Helpful video? Like and save! ------------------------------ 🐔🐔🐔🐔🐔🐔🐔🐔🐔🐔 Our unusual hobby - A CHICKEN COOP AT THE COUNTRY HOUSE for 25 chickens:    • Наше необычное хобби /  КУРЯТНИК НА ДАЧЕ н...   ---------------- Barrel watering, watering without a pump, how to water from a barrel, homemade watering pump, barrel watering without electricity, traditional watering method, bottle pump, how to make a DIY barrel watering system, siphon watering, gravity watering, rainwater watering