LinuxCNC Raspberry Pi4 & Mesa 7c81 Setup

#DIY#CNC#5axis#awesome_cnc_freek How to set up a CNC unit to control. This is for who want to create a homemade DIY CNC machine. Install LinuxCNC to a Raspberry Pi4 and remote control by Microsoft Remote Desktop    • Install LinuxCNC to a Raspberry Pi4 and re...   Raspberry Pi SPI needs to be enabled. sudo raspi-config sudo apt-get update sudo apt-get install mesaflash cd /home/pi/Downloads/7c81/configs/hostmot2 sudo mesaflash --device 7C81 --addr /dev/spidev0.0 --spi --fix-boot-block --write 7c81_5abobx3d.bit sudo mesaflash --device 7c81 --addr /dev/spidev0.0 --spi --readhmid Latency Test    • LinuxCNC 2 6 3 Latency Test   LinuxCNC Manual http://linuxcnc.org/docs/stable/html/ Become a member of this channel    / @a-cnc-f   *These are affiliate links. When you click one of these links and make a purchase, it helps to support this channel projects.