Flex Coat Rod Building - High Performance Rod, 2 Hour Build, Keep it Simple
In this video, Roger builds his favorite fishing rod and walks you through all the steps he follows. It's roughly a two-hour build cut down to 12 minutes, most importantly keep it simple. www.flewxcoat.com
▶︎
This is RodBuilding Episode #5 Finishing like a Pro
▶︎
ProKote vs Flex Coat Thread Finish
▶︎
Designing Spinning Rods: Where to Begin
▶︎
Flex Coat Rod Building - Applying Flex Coat Rod Wrapping Finish "How We Do It"
▶︎
Flex Coat Rod Building - Tools, Tips, & Tricks "How We Do It"
▶︎
Custom Rod Building Cork Turning Basics
▶︎
A revolution in rod component layout and design
▶︎
Flex Coat Rod Building - Installing a Pre-shaped Cork Casting Grip "How We Do It"
▶︎
Oil THESE 7 Spots Before You Ruin Your Reel
▶︎
ROD BUILDING OVERVIEW; Terry Scroggins Teaches Rod Building Using Mudhole Tackle Components
▶︎
Installing Guides with Flex Coat's OEM Power Rod Wrapper (DL747)
▶︎
How To Make a Finish Spatula the FCR Way
▶︎
Guide Foot Shaping and Polishing
▶︎
How to restore an old fishing rod. Stripping the rod to bare blank - Powered by Rodbuildingshop.com
▶︎
The Olive Branch Technique developed by Jim Trelikes
▶︎
Flex Coat Rod Building - Writing On Rods "How We Do It"
▶︎
How to Fix Finish Problems the FCR Way
▶︎
Custom Rod Building Applying Epoxy Finish
▶︎
HOW-TO APPLY EPOXY TO A FISHING ROD | Rod Building 101
▶︎