[MX-5 Miata] Front caliper rebuild + brake system flush (NA)

I recently took my other Miata out of storage for the winter and found my front left brake caliper sticking very badly. I took apart the caliper and rebuilt it using the new seals & piston from a remanufactured caliper I got at Napa. All of the parts I used can be purchased individually, which I would have done normally but my local Napa already had the caliper in stock and by using it's pieces I didn't have to wait for shipping. The cost of the caliper (after getting my core deposit back) was $48. I plan to rebuild the other front caliper since it might not be far behind and could also be a bit sticky. The reason I rebuilt mine instead of just using the caliper is because I took the time to clean and paint all of my calipers properly and this way I didn't have to have a mismatched caliper or have to repaint a new one. The two part paint I used is on my calipers is from www.g2usa.com, and it worked very well and is very durable. Check out their site they can custom mix any color! Have fun and drive safe! Thank you for watching