🚩 Секатори акумуляторні: Grand CA-20BL та Grand CA-40F/20BL-1 — важливі «НЮАНСИ», які слід знати.

About pruners: Grand CA-20BL and Grand CA-40F/20BL. 🕑 Time codes for VIDEO: — — — — — — — — — — — — — 00:02 — Introduction. 00:28 — About the options for completing the Grand CA-40F/20B pruner. 02:41 — Plate with the Characteristics of the “small” Grand CA-20BL and “large” Grand CA-40F/20BL pruners. ➤ What diameters of branches can they actually handle without “biting” the cutting blade. 03:26 — A visual demonstration of the diameters of branches in the “jaws” of the pruners, which they can cut without problems on the first try. 05:58 — What to do when the cutting blade has already “bitten”...? 06:20 — Demonstration of the movement with which we try to free the cutting blade of the Secateurs. 06:36 — Lubricating the blades so that the Secateurs “bite” less. What lubricant is better to lubricate and how to do it. 08:28 — About the Lubricant Aerosol for Chain Saws, which is good for lubricating the Secateurs blades. 09:46 — How and with what to clean the Secateurs Blades from tree sap stuck to them. 11:20 — About the 2A•h Makita M1 / ​​Makita LXT batteries that come with these Secateurs Grand CA-20BL and Grand CA-40F/20BL. • How long are they enough? • What will happen if you connect a 4A•h battery? • About the battery charge indicator. 12:27 — About the technique of several “bites” with a rotation of 90° and 180°, if you need to bite a branch, the diameter of which slightly exceeds the capabilities of the Secateurs. 13:20 — If the blade “bites” hard — what to do...? • Carefully release the blade using a small hammer (250 g). 15:03 — Once again about the Ø diameters of branches that these Secateurs can cut. 15:57 — About the differences in the behavior of these Secateurs during switching on and initialization. 16:22 — Turning off with a button. 17:35 — Changing the degree of opening of the blades in the Grand CA-40F/20BL (18mm/27mm/40mm). 18:49 — Changing the degree of blade opening in the Grand CA-20BL (1/2 and full opening). And differences in initialization. 20:41 — Once again, a summary about turning on and off, and about opening the blades. 22:23 — About automatic shutdown: • initialization “reset” timings, • automatic shutdown timings. ⁕ The dubious “benefit” of the LCD screen in the Grand CA-40F/20BL... 25:42 — Brushless motors on both Secateurs. 25:55 — Once again, about the features and differences during manual automatic shutdown. 26:38 — About the Backlight in the Grand CA-40F/20BL. 27:24 — About the Screen in the Grand CA-40F/20BL. • Poor contrast. ⁕ The dubious “benefit” of the LCD screen in the Grand CA-40F/20BL... 30:14 — About the three contacts on the “holes” of the “carcasses” – both pruners will work on the Grand telescopic extension rods: • 120 — 170 cm, • 130 — 250 cm, • 130 — 250ⁿ cm. 33:00 — How much do these pruners weigh: • Bare “carcass”, • with a 2 A•h battery, • with a 4 A•h battery. 34:32 — Let’s quickly run through the Notes. 36:01 — A 2 A•h battery lasts a very long time 36:09 — When it will be convenient to use a “small” pruner, and when a “big” one will be needed. 37:05 — A short test drive – what are the actual diameters of the branches these secateurs cut. 39:56 — Epilogue. * * * *