How to Replace Belt Component Kit 2008-2016 Chevrolet Cruze

Shop for New Auto Parts at 1AAuto.com https://1aau.to/c/178/ai/drive-belt-p... This video shows you how to install a new tensioner pulley and serpentine belt on your 2008-2016 Chevrolet Cruze. That squealing noise coming from your vehicle’s engine compartment could be a slipping belt, or it could be a bad pulley bearing, or both. A bad pulley could eventually damage the belt, which could create even further damage. This repair was done on a 2013 Chevrolet Cruze LS 1.8L and the process should be similar on the following vehicles: 2011 Chevrolet Cruze 2012 Chevrolet Cruze 2013 Chevrolet Cruze 2014 Chevrolet Cruze 2015 Chevrolet Cruze Tools you will need: • Flat Blade Screwdriver • Phillips Head Screwdriver • Pocket Screwdriver • 15mm Socket • 19mm Socket • 7mm Socket • Trim Tool Set https://1aau.to/onB/1AXXX00006 • E14 Socket • T20 Socket • Ratchet • Socket Extensions • Torque Wrench https://1aau.to/ov6/1AXAA00044 • Block of Wood • Floor Jack Subscribe:    / @trq   Check out our playlist: Chevy Cruze 2011-2015 1st Gen:    • Chevy Cruze 2011-2015 1st Gen   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.