Make Your 3D Printed Parts Look Metal. Comparing Rub N Buff to Spraypaint.

Tired of silver spray paint making your 3D printed props look flat and fake? In this video, we're showing you the secret weapon of pro prop makers and 3D printing enthusiasts: Rub 'n Buff! We put the classic silver rattle can paint up against the wax-based metallic paste Rub 'n Buff to show you the huge difference it makes. Watch as we transform a plain 3D print into a realistic metal piece, covering every step from crucial surface prep to the final buffing process. This simple technique is one of the most effective ways to achieve a stunning chrome or metal finish for your cosplay props, models, and parts! In This Tutorial: Intro & The Rub 'n Buff vs. Spray Paint Difference [00:00] The ULTIMATE Surface Prep: Wet sanding with 600 and 1000 grit to remove layer lines [01:25] The Secret to a Deep Shine: Why a smooth, black undercoat is essential for a realistic metallic look [02:50] Applying Rub 'n Buff: How to use this wax-based paste and why less is more [03:27] Buffing for Maximum Shine: The technique needed to activate the metallic powder and get a mirrored finish [05:55] Pro Tips for fixing flaws and ensuring your finish stands out [06:54] 🛠️ Products Used: Rub 'n Buff (Silver Leaf) https://amzn.to/3wyo85D 600 & 1000 Grit Wet/Dry Sandpaper Gray Primer Flat Black Paint (Gloss Black also recommended for deeper shine) Don't forget to Like and Subscribe to Coz3D for more shop tips, 3D printing tutorials, and how-to guides! Watch our previous video on how we got the print lines out of this part! Music provided by Chineese Jailbreak -   / chinesejailb.  . #3DPrinting #RubNBuff #Cosplay #PropMaking #MetalFinish #3DPrintFinishing #DIY #Coz3D