Jak zrobić Interfejs Bluetooth USB do instalacji gazowej LPG za 20zł?! STAG LPGTECH KME LANDI RENZO

Aliexpress LIST / LINKS TO THE PARTS NEEDED TO BUILD THE BLUETOOTH LPG INTERFACE: Good HC-06 Bluetooth module (the poorer BT is JDY-30 JDY-31 - HC-05?): Https://bit.ly/3D0DIb9 USB TTL UART converter FTDI: https://bit.ly/3Vw3kUv SUPERSEAL sockets: https://bit.ly/3TlTpis Voltage stabilizer 7805: https://bit.ly/3gbFa1f Connecting cables DUPONT (female-female): https://bit.ly/3S5zinR Resistors 10kOhm and 20kOhm or 1kOhm and 2kOhm + 2x 100nF capacitors and optionally I added 2x 100uF 25V at the input and output of the L7805CV system -------------------------------------------------- Program for PC: YAT - Yet Another Terminal -------------------------------------------------- System documentation from Banggood.com JDY-31 Bluetooth Module: http://myosuploads3.banggood.com/prod... BAUD Param: (4 - 9) 4 ： 9600 5 ： 19200 6 ： 38400 7 ： 57600 8 ： 115200 9 ： 128,000 COMMAND LIST: 1. AT + VERSION - version number JDY-31-V1.2 2. AT + RESET - Soft reset 3. AT + DISC - Disconnected (valid in connection state) 4. AT + LADDR - Query the module's MAC address 5. AT + PIN - Connection password settings and queries 1234 6. AT + BAUD - Baud rate setting and query 9600 7. AT + NAME - Broadcast name setting and query JDY-31-SPP 8. AT + DEFAULT - reset -------------------------------------------------- Link to the topic on the LPG forum www.lpg-forum.pl: https://lpg-forum.pl/interkietas-blue... -------------------------------------------------- Mini sec SECeco - Baud rate set is 57600 StopBits: 1 stop bit, Parity: No parity, WordLength: 8 -------------------------------------------------- ------ Old (OLD) STAG and KME - Baud rate set to 9600 New (NEW) STAG (GoFast, QBOX, QNEXT, QMAX / Q-BOX, Q-NEXT, Q-MAX) - Baud rate set to 57600 StopBits: 1 stop bit, Parity: No parity, WordLength: 8 -------------------------------------------------- ------- Landi Renzo- The baud rate set is 9600 StopBits: 1 stop bit, Parity: No parity, WordLength: 8 -------------------------------------------------- ------- LpgTech - Baud rate set is 19200 StopBits: 1 stop bit, Parity: Odd parity, WordLength: 8 (AT + UARTMODE = 0,1) -------------------------------------------------- ------- Autronic - Baud rate set is 9600 StopBits: 1 stop bit, Parity: No parity, WordLength: 8 -------------------------------------------------- ------- Dtgas -Baud rate set is 9600 StopBits: 1 stop bit, Parity: No parity, WordLength: 8 -------------------------------------------------- ------- OMVL AEB - Baud rate set is 9600 StopBits: 1 stop bit, Parity: No parity, WordLength: 8 -------------------------------------------------- ------- ESGI - Baud rate set to 9600 StopBits: 1 stop bit, Parity: No parity, WordLength: 8 The baud rate set is 7200 -------------------------------------------------- Beloved, the film is awaited by some today about how to make a Bluetooth interface for diagnostics and adjustment of LPG gas installations! Let's admit that it's a light "special" for 20,000 subscriptions :) (it was supposed to be something else today, but I had a few topics: /). Continuing the good series of LPG series, I decided that I would make a film about this interface - of course, something must have spilled out, that the systems do not work with LPGTECH, here one system was wrong in a bag of 30 LM7805 pieces, the new Andonstar AD409 microscope did not record sound (even with an external microphone), and finally the quality of the recording from the laptop is tragic ... After all, I give links to www.lpg-forum.pl where it describes exactly what to do with the commands and there are diagrams, data, discussion, etc. - I hope that who will be able to handle this simple project :) I hope that this interface will replace the USB cable for someone :) - You can also conveniently download the application for a laptop (it supports the same application as OPTO USB cables) / phone / tablet / smartphone and make a quick diagnosis on the road, or even have a preview on the engine MAP when the engine has no MAP and has MAF - also, we are able to extend our pure mechanics diagnostic capabilities! It started in 2019 - is today's movie enough? I hope! And whoever reads to the end, write in the comment: "art up to three times :)" -------------------------------------------------- I have a rebate code for you: TYTUS5 5% discount on the entire range except for the "Jumper cables and clamps" category for both stores: www.e-moto.pl www.sklep.akubiz.biz The World of Accumulators Szczecin Gryfińska 106 - tel. 609 302 803 Santocka 42 - phone: 609 309 969 Mobile battery service with access in Szczecin and the surrounding area phone: 505 135 136 Mon-Fri: 7-22 Sat-Sun: 7-20 e-mail: [email protected] Instagram: www.instagram.com/rzezbiarz.tytus #Tytus # Sculptor #mrAccumulator #Szczecin #Mobile #Service #Battery #Battery #Accumulator #LPG #STAG #KME #LPGTECH #LANDIRENZO 10/15/2022 20 214