How I Built the Roof for My New Woodworking Shop (Part 3)

Part 1 (Building the Foundation) : [   • Building my workshop |  Part 1 foundation  ] Part 2 (Framing the Walls) : [   • Workshop building — Part 2 | Raising & fra...  ] Welcome to Part 3 of the workshop build! This roof was definitely a challenge for my first time, but I learned so much during the process. In this episode, you'll see how I tackled everything from cutting and installing the roof rafters and ceiling joists to framing the gables, laying down the OSB sheathing, and setting up the complete grid of roofing battens before finally putting up the corrugated metal sheeting. For all the experienced builders and roofers out there: what tips or tricks did I miss? Let me know in the comments! Quick Disclaimer: I am NOT a professional roofer or contractor. This video is just me documenting my own DIY experiments and showing how I tackled this project. Roofing can be dangerous and requires specific skills. If you are planning to build or repair a roof, I highly recommend consulting or hiring certified professionals! Here are the project timestamps so you can jump to any section: 00:00 - 00:26 Intro 00:27 - 01:07 Installing ceiling joists using hurricane ties 01:08 - 03:51 Cutting and installing rafters 03:52 - 04:32 Installing fascia 04:33 - 07:08 Installing OSB roof sheathing 07:09 - 10:38 Installing roof underlayment 10:39 - 14:02 Counter-battens & battens 14:03 - 14:47 Installing gutters 14:48 - 15:10 Gutter apron 15:11 - 16:13 Installing corrugated roofing 16:14 - 17:17 Installing ridge cap and gable flashing 17:18 - 17:57 Outro If you enjoyed watching this DIY journey, don't forget to hit that Like button, leave a comment with your thoughts or tips, and Subscribe for more build videos! Thank you #diyroofing #metalroofing #workshopdiy #diyhomeimprovement #workshop #diyprojects