Как прокачать контур сцепления на Peugeot 308 1.6 HDI

The clutch circuit shares a reservoir tank with the brake circuit, so when bleeding the clutch, carefully monitor the brake fluid level in the reservoir and top it up regularly. Fill the reservoir to the top, have your assistant press the clutch pedal, and open the valve counterclockwise 270 degrees. Old brake fluid from the clutch circuit will start flowing through the tube; mine was just black. When the fluid stops flowing, close the valve clockwise all the way, add brake fluid to the reservoir tank, and have your assistant push the clutch pedal back to its highest position. This will drain the brake fluid from the reservoir tank, and you can top it up. Have your assistant press the pedal again and open the drain valve. Repeat this procedure until clean, fresh brake fluid flows through the tube. That's it. Nothing complicated. Good luck to everyone. Video shot on an Honor 6x phone.