PROA7 or PROA7PLUS: Entering Programming

In this video, Darrell from Alarm Grid shows users how to enter programming mode on a Honeywell Home PROA7 or PROA7PLUS, or on a Resideo PROA7C or PROA7PLUSC. To enter programming, tap the menu icon in the bottom center of the screen. Scroll down to Tools, then enter the current Installer Code. The default Installer Code is 4112. This will bring you into the Installer Tools menu. From here, select Programming from the available options. Once you enter programming, you can edit the number of partitions, add/edit/delete any peripheral devices, including Sensors, Key fobs, or keypads. In Z-Wave Peripherals, you can Include or Exclude devices. In the Users' programming, you can add/edit/delete user codes. In Panic Alarms, you can configure the keypad panic options, and in Advanced Settings, communicator and other system settings are configured. In addition to system programming, the Installer Tools Menu can allow you to view System Information, Perform System Tests on both communicators and Sensors, Enable or Disable Local Alarm Mode, Change the Installer PIN, Default the panel back to factory settings, and Reboot the panel. To exit programming when you're finished, choose the left arrow in the upper-left side of the screen to go back to the previous screen. Keep doing this until you return to the main Security Screen. https://www.alarmgrid.com/faq/how-do-... http://alrm.gd/get-monitored