Плетение цепочек на станке. Тонкая изящная и неразъемная цепочка своими руками в домашних условиях.

#chain #wire #machine Chain machine - twisting wire chains on a homemade machine. Silver-plated copper wire, 0.25 mm. When using harder wire, use a smaller diameter. Tools: homemade machine, tweezers. Press one end of the wire against the frame and twist it one and a half times around the stand and spit, securing it with a locking loop on the stand. Holding the ends of the wire, twist the spit. After the required number of twists, break off the wire. After removing the link from the spit and stand, thread the wire through one of the holes in the twisted link of the future chain and repeat the process. Twist a new link, holding the threaded link near the stand to prevent it from slipping onto the spit. Chain Machine Repair    • Ремонт станка для цепочек. Исправление пов...   How a chain weaving machine is made - sketch and dimensions.    • Как сделан станок для плетения цепочек - э...   How to make a lobster clasp for a wire chain    • Как сделать замочек-карабин для цепочки из...   How to flatten wire and chain links    • Как расплющить проволоку и звенья цепочки....   00:00 Solderless chain maker 00:18 Solderless chain wire 01:00 How to start twisting a chain 01:12 Installing the wire in the maker 01:23 First turn of the chain link 01:38 Securing the chain link with a ring 01:48 Rotating the spit to twist the link 02:05 Making the first chain link 02:50 Making the second link and joining it to the first 04:15 Joining the two chain parts