How to Build an Electric Skateboard in Less Than 15 Minutes

All-in-One Introductory Video on How to Build an Electric Skateboard 2017. 1. Parts List 2. Assembly 3. Vesc Settings 4. General Review Note this video assumes you have a basic understanding of electronics. Hardware Longboard: Second hand 270kv N5065 Brushless Outrunner Motor, Motor Mount, 3:1 Belt Drive, Trucks and Wheels (Can’t find the one I got anymore but this is pretty close): http://www.ebay.com/itm/N5065-8044-16... Vesc: http://www.ebay.com/itm/VESC-New-4-12... [NOTE: The vesc in the video is apparently no longer available. Some alternatives are: https://miamielectricboards.com/shop-... (Connection to Battery: XT60, Connection to Motor: 4mm, Firmware Version: Standard 2.18) https://hobbyking.com/en_us/turnigy-s... (Looks like you need your own connector for this one) https://www.ebay.com/itm/Maytech-Benj... (Looks like you may need your own connector for this one) 2.4GHz RC Remote Control: http://www.ebay.com/itm/2-4GHz-Receiv... 2x 5000mAh 30C 3S1P LiPo Batteries: https://hobbyking.com/en_us/zippy-500... Sistema Box: From a local warehouse Wires, Connectors and Adapters: XT60, XT90 Anti Spark, XT60 to 4mm (HXT) Bullet Connectors, XT60 series connector https://hobbyking.com/en_us/hxt-4mm-t... https://hobbyking.com/en_us/xt60-seri... https://hobbyking.com/en_us/xt60-harn... http://www.ebay.com/itm/XT90-male-to-... http://www.ebay.com/itm/1-Pair-AMASS-... (For the anti-spark plug, you'll want to short the XT90 female connectors as depicted in the video. AWG12 should suffice.) Battery Charger: https://hobbyking.com/en_us/imax-b6-a... Software BLDC Tool: http://vesc.net.au/BLDC-TOOL/