Perfect THREADS every time 🔩 - Angular Approach Method
Hello and welcome to the Aaron Engineering channel. Today video is a viewer request from my former TAFE student (apprentice) @Sumpa_Phuntsok. This video will demonstrate the "Angular Approach" method to cut a 60 degree metric thread. It will also provide the math on how to ascertain the thread depth and corrected angle length when using the compound feed. Note: Both methods of threading (plunge & angular approach) is taught to most apprentices in Australian TAFE college. The information used for this video came from the (green) Fitting & Machining Textbook. Refer to pages 297-299 for the thread cutting information. #turning #threading #machinist #machining #engineering #howto #shopmath
▶︎
How To Cut Threads on a Lathe
▶︎
How To Cut Threads On A Lathe
▶︎
Thread Depth, Tool Tip Width and Length of Cut NO TRIG NEEDED
▶︎
Making a Vernier Degree Wheel for the New Hobbing Machine!
▶︎
Simple Project Will Save Time on the Lathe
▶︎
Foolproof way to cut perfect threads on a lathe.
▶︎
EVERY Machinist Should Make This Tool
▶︎
Solving the CHATTER problem for the home workshop
▶︎
Maxing Out The Lathe To Machine a 1000lb Drill Sub
▶︎
How to accurately cut threads on a manual lathe - including without using a relief groove!
▶︎
Making a set of Machinists V-Blocks
▶︎
How to cut a thread on a manual lathe (Intermediate method ideal for home workshop & hobby engineer)
▶︎
Internal Threading On The Lathe!
▶︎
Thread Anatomy- (In less than 5 min!)
▶︎
Safe and Easy Internal threading with a hard stop
▶︎
Making a Simple Cut Knurling Tool for the Home Shop
▶︎
Threading on a manual lathe BEST TECHNIQUE EVER !!!!
▶︎
Making a PRECISE lead screw nut | CRAIG'S WORKSHOP
▶︎
Shop Math | Dividing Head Calculations | Simple Indexing
▶︎