How to Replace Coolant Reservoir 2010 2013 Ford Transit Connect

Shop for New Auto Parts at 1AAuto.com https://1aau.to/c/38/aT/radiator-over... This video shows you how to install a coolant reservoir on your 2010-2013 Ford Transit Connect. Your vehicle is equipped with a tank containing extra coolant, and space for the coolant to overflow to when the system gets hot. A cracked or broken tank could slowly drain your vehicle of much needed fluid. A dirty tank could send debris into the system, clogging it. This repair was done on a 2013 Ford Transit Connect XL 2.0L Mini Cargo Van 4-Door FWD Automatic and the process should be similar on the following vehicles: 2010 Ford Transit Connect 2011 Ford Transit Connect 2012 Ford Transit Connect 2013 Ford Transit Connect Tools you will need: • 10mm Socket • Pliers • 1/4 Inch Ratchet • 3/8 Inch Drive Ratchet • Pick https://1aau.to/oEj/1AXAA00037 • Gloves https://1aau.to/ozz/1AXSS00048 • Safety Glasses Subscribe:    / @trq   Check out our playlist: Ford Transit Connect 1st Generation 2010-2013:    • Ford Transit Connect 1st Generation 2010-2013   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.