Cara Membuat/Merakit Jalur Kabel Lampu Depan Belakang Honda Supra x 125,kharisma,grand,Legenda,Supra

How to make or assemble the front and rear light wiring for a Honda Supra X 125, Kharisma, Fit New, Grand, or Legenda motorcycle. The first step is to check the yellow wire from the spool as the main current that enters the rectifier. The black wire with a yellow stripe or green wire serves as the ground. 1. For the yellow wire from the rectifier socket, ensure there is current and the output of the rectifier with the yellow wire that goes directly into and reaches the on-off switch. 2. The black wire with a yellow stripe or green wire must be connected to the body or frame of the motorcycle, making sure it is connected. If the rectifier's ground is not connected to the body or frame of the motorcycle, there will be problems with the lights quickly breaking and the battery will quickly run out, drop, and die. 3. Connect the output cable from the on-off switch to the cable from the headlight or taillight, and secondly, ensure the ground on the front or rear light is connected to the frame or body of the motorcycle. Thank you very much to all #SUBSCRIBERS# and viewers, hopefully this knowledge is useful. Please #SUBSCRIBE AND LIKE # #IbotMotorChannel # If you have any questions, please write them in the comments section. Phone/WA: 085863491419. Thank you very much.