cara buat cas aki motor sederhana|| trafo CT

Battery chargers are commonly sold in electronics stores, but they are often very expensive. By making your own, you can save money and gain experience. There are also many materials available in electronics stores, with various types and options. There are many amperage sizes available for your own battery charger, depending on your needs. However, in my opinion, to make your own battery charger, I recommend using a larger, high-quality transformer for durability. A larger transformer will provide faster charging and better results. For your own battery charger, I think a 5-amp transformer is best. I think anything smaller than 5 amps will yield less satisfactory results. Choose the best quality materials and try to choose a transformer with large enameled wire. Don't make it too small. Too small will be detrimental to the transformer, as it will overheat and could catch fire if it can't withstand the load. The transformer should be at least 5-15 amps, 15V (the larger the better). Diodes for diodes I recommend using a xiprox model diode in the shape of a box 3. Electrolytic capacitor elko size 2200uf 25v4. 5-10 amp fuse + fuse housing5. Single cable with red and black color6. 1 pair of red and black battery clamps7. Box, for the box you can also make it yourself from plate/wood to save money. but if you want a good model result, it's okay to buy it8. Enough nuts and bolts Tools needed1. Solder2. Enough tin3. Cutting pliers