Taking the Passap E6000 Apart Part 1 Deep Cleaning

If you want to deep clean your Passap E-6000, you need to first take it apart! In this video we begin the adventure of Deep Cleaning! And this particular machine was really dirty! This video is an experiencial video...in other words, this is my first attempt at deep cleaning and I am sharing what happened and what I learned as I go. After researching all the material available on the subject, I started and what I found was that there are easy and hard ways to do each task. You may know some of the easy ways already but I first followed the recommendations...then shared what I learned and some shortcuts that I discovered! Let me know if you want me to do an updated version of this video as after I put it together and found that it works well, I still learned even more time savings methods to Deep Clean. In Part 2, I put my E6000 needlebed together again! I recommend you watch this video before attempting a deep clean because you will gain an even better understanding! See you then! Key Moments: 00:00 Introduction 01:37 Pulling the racking handle 02:28 Disconnecting the 3000(A) motor 05:16 Removing misc stuff from beds 06:17 Disconnecting and removing locks 07:15 Removing the color changer 14:04 Disconnecting the motor stabilizer 15:18 Removing needles the slow way on front bed... 16:44 Remove needles on back bed 17:04 Easy way to pull out pushers 18:41 Remove white plates 19:09 Remove all the metal plates 19:36 Unscrew the nuts from the rails 24:39 Remove pusher retaining bar and spring. 31:38 Soak in denatured alcohol. 28:20 Cleaning the individual parts 34:06 Use soap and water on the plastic parts. 37:59 Use denatured alcohol & 1 tablespoon of oil. Leave a comment if you would like to see more videos like this! Happy Machine Knitting! Mary Mary can be reached at [email protected] Facebook: @TwistedYarnsMary or through the comments! PASSAP Knitting machine #PASSAP techniques #passap tutorial #Passap deep cleaning