Mein größter Fehler mit dem DCT😅

Don't play with the throttle grip when you've engaged a gear, that changes the grinding point. RESET-Code DD N D N Why/when do you do the RESET? If your clutch slips, DCT shifts poorly or the grinding point has shifted far to the rear. What happens there? The learned values ​​are deleted in the control unit and after the engine has started, the end stops of the clutch actuators and the grinding points of the clutches are stored. Can anything happen? You can't screw up anything. If you start the RESET when cold, it will take longer, at least 5 minutes. Then just let it run, the warmer the engine is, the faster the RESET is done. When warm, it only takes 15 - 18 seconds. Origin: This is from the time when the tester was not used. (1000 AT and NC750) What is changing? The clutch has grip again. 0:00 My mistake with DCT! 1:46 Reset learning values ​​from DCT. 3:58 Farewell 4:14 Outtakes-Don't do that to your Africa.