DRESSMAKER 2000 Sewing Machine info Video #7 b Changing Bobbin & pulling thread up

Removing the bobbin from the bobbin case. Threading the bobbin in the bobbin case. Have the thread coming over the top of the bobbin towards you when putting the bobbin into the bobbin case. Holding the little flip out tab (bar) on the bobbin case locks the bobbin into the case for positioning into the machine. Keep the bar on the bobbin case pointing up so that the placement is correct when placing it back into the bobbin race. Release the flip out tab and the bobbin will stay in place. Put any extra thread, tail, into the bobbin case. Shut the door. Holding the machine thread in the left hand, gently turn the hand wheel toward you. Continue until the top thread on the machine has picked up the bobbin thread. Use a point turner, jean a ma gig, or something flat to push the trhreads to the back and under the presser foot. Pull both threads evenly to the back and off the machine. Do this so the threads don't get bunched in the machine and jam, again.