How to build a recumbent trike.The most important bit first, front wheels and steering.

Second part in the series of building a no weld recumbent trike. Starting near the front with the steering parts and how to make them. Building the components with Flatbar steel, Pillar Drills, Bending Machines and no swearing even when things go wrong. Come for the aesthetic metal cutting shots, stay for the out of control power drills and broken screw taps. 01:23 Tie bar Linkage 08:58 Top and Bottom Mounting Bracket 10:10 Steering Knuckles 16:53 Cut a King Pin 17:04 Final Modifications Notes: M8 tapped hole could be a 3/8" or 7/16" UNC Kingpin tubing is 25mm diameter (wall thickness 2mm) so 1" x 0.065" or 0.083" would be fine Top and bottom steering brackets with the 28mm hole also require bending music by pixabay .com