How to Replace the Inner & Outer Tie Rods & Lower Control Arm (10:02) on a 1998 Toyota Camry

I APPRECIATE ALL YOUR PATIENCE AS I UPLOAD ON A INCONSISTENT SCHEDULE FOR A LITTLE BIT. I'LL BE LOADING EVERY CHANCE I GET UNTIL I CAN GET BACK TO A REGULAR SCHEDULE LIKE BEFORE. ALSO I APOLOGIZE ABOUT ALL THE COMMENTS I HAVE NOT BEEN ABLE TO GET TO, I WILL GET TO THEM AS I CAN! Easy to follow step-by-step guide on how to replace your own inner and outer tie rods, and lower control arm (skip to 10:02 for control arm portion BUT I advise watching the whole process). Save yourself a few $$$ by watching this video and replacing them yourself!!!! Tools Used: -1/2in ratchet. -1/2in extension. -Inner tie rod installer/remover w/adapters. -Two different length pry bars. -Ball joint separator. -Rubber mallet. -Ball peen hammer. -3lbs sledge hammer. -Two different sizes of water pump pliers. -Two different sizes of present wrenches. -18mm wrench. -14mm wrench. -12mm wrench. -10mm wrench. -Needle nose pliers. -Side cutters. -Pneumatic grease gun. -Anti seize. -1/4in hex impact wrench. -10mm socket. -1/2in impact wrench. -30mm socket. -19mm socket. -17mm socket. -14mm socket. Parts Used: -Lower control arm (driver's side). -Inner tie rod. -Outer tie rod. As always make sure you subscribe, give me the thumbs up, and share with your friends & family! Thanks for watching, aloha!!!