How to Replace Neutral Safety Switch 1998-2002 Lincoln Navigator

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-89-j This video shows you how to install a neutral safety switch on your 1998-2002 Lincoln Navigator. The neutral safety switch is a safety device that does not let your vehicle's engine start unless the transmission is in neutral. If the switch is malfunctioning, or failed, you may not be able to start your vehicle! This repair was done on a 2000 Lincoln Navigator Base 5.4L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles: 1998 Lincoln Navigator 1999 Lincoln Navigator 2000 Lincoln Navigator 2001 Lincoln Navigator 2002 Lincoln Navigator Tools you will need: • Pry Bar https://trq.video/oN5-1AXAA00020 • 8mm Wrench • Ratchet • Brake Grease • Cloth Rags • Paper Towels • Rust Penetrant • Sandpaper • Floor Jack • Hammer • Jack Stands • Wheel Chocks • Gloves https://trq.video/oPH-1AXSS00048 • Safety Glasses Subscribe:    / @trq   Check out our playlist: 1998-2002 Lincoln Navigator 1st Gen:    • 1998-2002 Lincoln Navigator 1st Gen   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.