How I Set Up My CNC Router to Machine Knife Handles

Watch a complete lesson from my CNC Knifemaking class! In this lesson, I walk through the machine operation process I use before cutting a set of knife handles on a CNC router, including how I verify that my post processor is working correctly. You'll see how I prepare the material, tape it to the machine, load the program, set work offsets, verify everything is ready to run, and begin machining. This lesson is part of my complete 12 hour online CNC knifemaking course. While this video covers the hands-on machine setup, the full course also teaches the CAD design process, CAM programming, tooling selection, feeds and speeds, workholding strategies, and the complete workflow for manufacturing knives using CNC mills and routers. If you've been curious about my courses, I wanted to make one full lesson available so you can see exactly how I teach before deciding if the full program is right for you. Learn more about the complete course: https://complianceedgeknives.com/coll... If you found this video helpful, consider subscribing for more CNC knifemaking content, shop projects, and manufacturing tips. Disclaimer: This video is provided for educational purposes only. Operating CNC machines and related equipment involves inherent risks. Compliance Edge Knives LLC assumes no responsibility or liability for any injury, damage, or loss resulting from the use or misuse of the information presented. Always follow your equipment manufacturer's instructions, use appropriate safety precautions, and operate machinery only if you are properly trained.