2014 Mitsubishi Mirage Flashing D filters and fluid change P0876 Transmission Fluid Pressure Sensor

CORRECTION: Do not use the fluid I used in the video. It will cause the transmission to slip. Only use genuine Mitsubishi Motors CVT-J4 fluid in the transmission. The correct fluid is green and not very thick. The fluid I used in the video was thick like gear oil. The correct fluid is more thin like motor oil. I changed the fluid out for the OEM CVT J4 Mitsubishi brand cvt fluid as soon as I could. I am waiting to see what if any damage I may have caused by using the wrong oil. So far so good. This vehicle has 137,000 miles. The vehicle felt like the transmission was slipping at a stoplight. It slipped and jerked and then the D on the dash started flashing. I bought a code reader off amazon and read a P0876 TRANSMISSION FLUID PRESSURE SENSOR/SWITCH D CIRCUIT RANGE/PERFORMANCE I researched on forums and found that the filters were probably clogged which causes air bubbles to form and makes the transmission slip. If you buy the parts from Mitsubishi (if you can even find them from Mitsubishi) they will be much more expensive. I found this parts list on a forum and it worked for my 2014 Mitsubishi mirage. Going forward, I will probably change the 3 quarts I get out of the drain pan and replace it every other oil change. Parts used Main Filter: https://cobratransmission.com/JF015E.... Pan Gasket: https://cobratransmission.com/JF015E.... Cartridge Filter: https://cobratransmission.com/JF015E.... O Ring: • ACDelco 25198771 https://www.rockauto.com/en/parts/gm+... Fluid: MITSUBISHI MOTORS GENUINE CVTF-J4 NOTE: The fluid I used in the video caused the transmission to slip. Only use Genuine Mitsubishi Motors CVT-J4 fluid. The process for changing the transmission fluid and both filters is located here. It was too long to fit in the description. https://docs.google.com/document/d/1Z...