Complete guide on how to weld Heim joints / Rod ends
In this episode we look at everything you need to know on how to weld heim joints/rod ends. 0:00:00 Intro and liability 0:02:26 Book learning 0:14:48 Lets weld and inspect 0:26:25 Cut and etch 0:40:00 Conclusion
▶︎
Welding polarity and why electron theory is used (In response to #weld.com)
▶︎
Max thickness of steel you can weld with Flux core (self shielded)
▶︎
Welding hooks and D rings with 7018
▶︎
Suspension Joints Explained
▶︎
Making full penetration aluminum welds
▶︎
Weld Repairs You Should Avoid
▶︎
TIG Welding The Worlds Worst Fit Up | Uneven Gap & Excessive Hi-Lo
▶︎
Does beveling increase weld strength?? Deep dive
▶︎
What Pros Know About Stick Welding Electrodes
▶︎
How to improve stick weld Tie-ins and restarts
▶︎
Beginner TIG Welding Techniques: Laywire and Dabbing Explained
▶︎
Dual shield revisited: More tests with .035, .045, different shielding gases, and more
▶︎
10 Secrets for Perfect O2 Bung Welds
▶︎
Why Pipeline Welders Only Burn Half a Welding Rod
▶︎
Adventures in TIG Brazing
▶︎
Learn to Make (Perfect) FLUX CORE Welds FAST:( How To Stack Dimes)
▶︎
This Is Why You SUCK At Stick Welding
▶︎
DIY Welding Tools: 7 Shop Tools Every Welder Should Make
▶︎
TFS: Learn to Weave with TIG
▶︎