Pratik seyyar lamba nasıl yapılır?

Materials needed to make a practical portable lamp: 1- 2x0.75 cable 2- Bulb 3- Plug 4- Socket 5- Side cutters 6- Testing pen 7- Electrical tape Procedures to be performed in this order: 1- Adjust the length of the 2x0.75 cable to the desired length. 2- One end of the 0.75 cable will be the plug, and the other will be the socket. The plug will connect to the socket and receive electricity, transmitting it to the socket. The bulb, once inserted into the socket, will be activated by the electricity and illuminate. 3- The 0.75 cable is divided into two smaller cables. Loosen the cable clamping screws on the plug, and insert the cable. 4- The cables passing through the clamping device are folded in half, thickened, and inserted into the holes in the plug. 5- After ensuring the clamping device and the perforated cable wires are secure, the other end of the 0.75mm cable is connected to the socket. 6- The bulb is placed in the socket by turning its threads. 7- The bulb begins to light when the plug is inserted into the socket.