Connecting to Wires X with Yaesu SCU-57 - Step by Step!

We'll guide you through every step of connecting your Yaesu FT-5DE to Wires X using the SCU-57 cable. Whether you're a seasoned ham or just starting out, this video will provide you with clear, easy-to-follow instructions and tips to ensure a seamless setup. Products Showcased: SCU-57 Kit: https://www.hamradio.co.uk/yaesu-scu-57 FT-5DE: https://www.hamradio.co.uk/ft5 HRI-200: https://www.hamradio.co.uk/yaesu-hri-... FT4XE: https://www.hamradio.co.uk/yaesu-ft-4... ZUMSPOT-RPI: https://www.hamradio.co.uk/zumspot-rp... 00:00 - What is Wires-X? 02:47 - WiresX Registration https://www.yaesu.com/jp/en/wires-x/r... 05:28 - Finding Radio ID 06:46 - Drivers for SCU-57 https://www.prolific.com.tw/UserFiles... 08:30 - SCU-57 Kit Overview https://www.hamradio.co.uk/yaesu-scu-57 10:50 - Putting FT5 into Digital Mode 12:00 - Common Audio Issue Fix 13:23 - Setting Up Wires-X Software 14:15 - Connecting To Rooms 15:27 - Summary Find below instructions for configuring the FT5D with Wires-X: Firmware Update: Ensure FT5D is running the latest 1.11 firmware. If not, update using the provided USB cable (not SCU-57), external SAD PSU, download Yaesu USB drive, and Firmware update program. Slide the switch upwards to the main firmware update position. Network Configuration: Internet Router and PC must have uPNP enabled for Wires-X software. If uPNP is not enabled, open and assign Ports 46100, 46110, 46112, 46114, 46120, and 46122 to the IP address of the host PC. WiresX Registration: Navigate to the WiresX registration website: WiresX Registration. Register your email and callsign. Wait for a confirmation email directing you to the registration page. Obtain the Radio ID from the radio (not the serial number). Waiting Period: Wait 1-2 weeks until Yaesu WiresX emails you with DTMF User ID & DTMF Node ID. Driver and Software Downloads: Download SCU-57 Prolific driver from Yaesu: SCU-57 Driver or from Prolific: Prolific Driver. Download WiresX PDN software from Yaesu: WiresX PDN Software. FT5D Configuration: Enable Wires-X mode on FT5D by switching off the radio, holding the WiresX button & the button above, and turning the radio back on. Connect SCU-57 digital USB cable to PC & Radio. Audio Configuration: Ensure the target Windows PC has an external Microphone & Headset Jack. If not, the Wires-X software may not work. Use a USB headset or a USB to analogue adapter if needed. Wires-X Software Setup: Start Wires-X software and enter Radio ID, User ID & Node ID. If an error message appears (‘no audio device detected’), plug in a USB headset or a jack plug to the PC Microphone socket. Connectivity: Connect to the America link to begin, as it is very active.   NOTE: In PDN mode, a Room CANNOT be hosted; to host a Room, HRI-200 needs to be purchased.   Using Wires-X is NOT the same as using a Hotspot & YSF, this is real Yaesu hosted Wires-X, not 3rd party YSF   Feel free to reach out if you have any questions to [email protected] Ham Radio Store: http://www.hamradio.co.uk/ Like us on Facebook:   / hamradiouk   Follow us on Twitter: @HamRadioUK   / hamradiouk