TESTIFIRE - THE ALL IN ONE FIRE DETECTOR TESTER

This is the Testifire all in one fire detector tester. It tests smoke detectors, heat detectors and CO detectors - all using the same device on the Solo / No Climb Products extension poles. FEATURES Testifire - the all in one fire detector tester http://www.testifire.com/ ABOUT THE PRODUCT Use of Testifire has seen a significant increase in productivity for many users. Reports of time savings of up to 45 minutes per day are common - with an increasing number of engineers finding they can move around site quicker thanks to efficiency provided by a 3 in 1 tester compatible with the widest range of detectors. Time savings and productivity savings (66% +) through: Dramatic reduction in reset times through use of clearing cycle Latest technology stimuli generation and delivery Replacement of multiple tool with a single tester Combined stimuli deployment on multi-sensor detectors Faster testing of higher temperature detectors with hi-heat mode Unique ability to activate detectors using complex interdependent sensor algorithms Elimination of detector contamination and damage risk through controlled stimuli release Greater immunity from variation in ambient conditions through new stimuli generation technologies Wider range of detectors accommodated with wider cup and remote control option Professional testing requires professional equipment. Obvious or superficial as it may appear, Testifire leaves little doubt that the user is a professional, taking the job seriously and doing it properly. BRIEF INSTRUCTIONS: If you press the tick on ‘Smoke’ a ‘1’ will appear next to Smoke. If you then move down to ‘Clearing’ and press the tick a ‘2’ will appear next to Clearing. When testing the smoke detector the following will then happen: Lift Testifire over detector (no need to push up) smoke will automatically generate (indicated by blue flashing LED) When detector activates, lower detector (max 10 seconds) and Testifire will move ‘Clearing’ mode (indicated by clear LED) Lift Testifire back over detector to allow clearing mode to blow smoke away from detector A Smoke and Heat test could be programmed in a similar way. Press tick over ‘smoke’ and a ‘1’ will appear alongside smoke. If you then scroll to ‘heat’ and press the tick a ‘2’ will appear next to heat. Lift Testifire over detector (no need to push up) smoke will automatically generate (indicated by blue flashing LED) When detector activates, lower detector (max 10 seconds) and Testifire will move ‘Heat’ mode (indicated by red LED) Lift Testifire back over detector to test heat If required you could also test smoke and heat at the same time. To achieve this follow the sequence: Press the tick so the ‘1’ appears next to ‘smoke’. Scroll to ‘heat’ and press the tick a ‘2’ will appear but if pressed again it will show a ‘1’. This now means that when Testifire is placed around the detector it will generate smoke and heat and the same time – indicated by an alternate blue and red flashing LED. CONNECT WITH ME Email: [email protected] LinkedIn:   / dan-jackson-miet-b6780157   Facebook:   / danstheengineer   Twitter:   / danstheengineer   WORK WITH ME I produce videos for brands, companies and individuals within the electrical / fire / construction industry. I am willing to collaborate with brands / companies which includes paid work for: Product Reviews Giveaways / Competitions Hosting Sponsored Posts Videos / Vlogs Guest Posts / Articles for other websites Brand Rep / Ambassador Advertising MUSIC Bensound http://www.bensound.com/royalty-free-... Disclaimer: I was given this product in exchange for a video to be made on my first impressions of opening up the box. All views in this video are my own and I pride myself in offering my own opinion.