REHOBOT Hydraulics - Push & Pull kit (EXX-series)

The 5 t push-pull kits comes in three different variations: a basic kit, a standard kit and a universal kit. Which kit to choose depends mostly on the type of application it is suppose to be used in. In all kits a 5 t push cylinder is included. • Flexible tool kit for many different applications • Interconnects with other Rehobot equipment • Many different accessories If the job is carried out on different locations and full control over the cylinder movement is required, we recommend choosing a hydraulic hand pump. An air/hydraulic pump is the choice when you have access to compressed air. This pump is also more comfortable and faster to work with. Always make sure to either use a pump with a built in manometer or connect the system to a separate manometer (see accessories below). It is essential to always have full control over the work carried out - otherwise there may be risk for personal or material damage. The pump with hose kit is not included in the oush- pull kits and has to be ordered separately (see below). There is a dedicated space in the storage box for all three recommended pump kits. Basic kit (EB50) The basic 5 t push-pull kit includes all necessary parts in order to get the job started. It comes with a 11 t push ram and several accessories for the ram, e.g. extension tubes, clamp heads for the ram and piston and different pressure heads. Standard kit (ES50) The standard kit contains the same parts as the basic kit. Additionally it comes with a spreader and more accessories for the cylinder. The accessories make the kit more flexible. Universal kit (EU50) The 5 t - universal kit contains all the parts from the standard kit. Furthermore, it comes with a 5 t pull cylinder, a pull chain and accessories for the pull cylinder.