How to Replace Rear Driveshaft Coupler 2005-2010 Chrysler 300

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-553-E This video shows you how to install a rear driveshaft coupler on your 2005-2010 Chrysler 300. This repair was done on a 2005 Chrysler 300 C 5.7L Sedan 4-Door RWD Automatic and the process should be similar on the following vehicles: 2005 Chrysler 300 2006 Chrysler 300 2007 Chrysler 300 2008 Chrysler 300 2009 Chrysler 300 2010 Chrysler 300 Tools you will need: • Pry Bar https://trq.video/oMd-1AXAA00020 • 10mm Wrench • 18mm Wrench • 12mm Socket • 13mm Socket • 14mm Socket • 16mm Socket • 18mm Socket • Pliers • T55 Torx Socket • 1/2 Inch Ratchet • Ratchet • Socket Extensions • Swivel • Torque Wrench https://trq.video/oas5-1AXAA00044 • Anti-Seize Grease • Bearing Grease • Bungee Cord • Liquid Thread Locker • Marker / Writing Utensil • Rust Penetrant • Hammer • Pole Jack • Gloves https://trq.video/oJd-1AXSS00048 • Safety Glasses Subscribe:    / @trq   Check out our playlist: Chrysler 300 1st Generation 2005-2010:    • Chrysler 300 1st Generation 2005-2010   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.