Como habilitar o Piloto automático no New Fiesta usando ForScan

Folks, after purchasing the steering wheel for the New Fiesta or EcoSport that has the speed control buttons, you need to download Forscan and, using an ELM327 OBDII adapter, access the car's settings and enable "Cruise Control". *** The New Fiesta Sedan's cruise control includes the following functions: • Activate the cruise control system. • Set and maintain the desired vehicle speed. • Increase the vehicle speed. • Idle to a lower speed. • Resume the vehicle's previous speed. • Deactivate the cruise control system. Download/view the complete tip and also check the description and operation of the New Fiesta Sedan's cruise control/autopilot system, including the system diagram, its components, and network message table. Overview The cruise control system is controlled by the PCM and the IPC. The cruise control system is designed to maintain a selected vehicle speed between 30 km/h (18 mph) and the vehicle's limited maximum speed. When a MyKey® restricted key is in use and the maximum speed limiter is engaged, the vehicle speed will be limited. The maximum vehicle speed can be set to 105 km/h (65 mph), 113 km/h (70 mph), 121 km/h (75 mph), or 129 km/h (80 mph). The cruise control system is controlled by the steering wheel-mounted switches (ON/OFF, SET+, SET-, and CAN/RES), and by the brake pedal and CPP (manual transmission) switch inputs. The cruise control switches are wired to the IPC. The IPC sends a message from the HS-CAN to the PCM to control the cruise control system. The coil spring provides the electrical interface between the steering column wiring and the cruise control switches installed on the steering wheel. **** Subscribe to our channel.... Follow us on: Facebook: GaRaGe81Dg Instagram: GaRaGe81Dg Send an email to: Email: [email protected]