AL310 MIlling machine power feed installation on Induma milling machine

If you have an Induma milling machine, or a Bridgeport/clone and you're replacing a mechanical type power feed this might well help you out, otherwise you'll get an overview of installing a power feed on a mill table. If you have one of these power feeds and you need better instructions you can follow the servo instructions here: https://www.servoproductsco.com/specs... Backlash for the bevel gear is set at .015-.025" Please check that the instructions are appropriate for your power feed, and in any event do a dry run installation before bolting everything down and switching your power feed on. When the manual says that the bevel gear may be destroyed if the backlash is set incorrectly it's not an exaggeration.