LIGHTS, CAMERA, ACTION! - Wiring LS Swap HEADLAMPS Through Donor Fuse Box - UTX

Today at Ugly Truck, we're wiring up the headlights on this 1986 C10 6.0 LS swap to run through the OEM donor fuse panel. With the help of our trusty whiteboard, Jerry explains how the original 86 C10 circuit works, how the LS donor circuit works, and how we tie the two together. Since we no longer have the BCM, we use a couple of relays to trigger the new circuits. It's a more efficient way to run the lights, and we shaved off several amps running into the cab of this truck. 👉 Grab some UTX MERCH here! https://uglytruckexperience-shop.four... Parts List: Solder BUTT Connectors: https://amzn.to/4n2lM3Y Heat Shrink: https://amzn.to/4mF30jw Non-insulated BUTT Connectors: https://amzn.to/4n7H9kI Ratcheting Wire Crimper: https://amzn.to/3UOTcao NOTE - The links above are affiliate links. As an Amazon Associate, we earn from qualifying purchases. We receive a commission from ANY purchase made through these links, at no cost to you. This helps support the channel to bring you more Ugly Truck, more often! Thank you for your support! Wiring LS swap air conditioning through PCM:    • Wiring LS Swap AC SYSTEM With PCM Idle Con...   For more helpful LS Swap videos, click here!    • LS SWAPS - Tips & Tricks - UGLY TRUCK EXPE...   Follow us on Facebook! fb.com/uglytruck Check us out on Instagram! @uglytruckexperience Want to send us something? (NEW address!) 7915 E. Division St. Strafford, MO 65757 DWRINN9MFXKAOJPL #squarebody #lsswap #c10 #lsc10 #utx #uglytruck #uglytruckexperience