フロロラインとナイロンラインの擦れ強度比較実験。やっぱりGTRウルトラが強いのか？【釣り】

Which is stronger, Fluoro or Nylon? There is no end to the topic. Click here to subscribe ⇒ http://bit.ly/385XH5T ▼ Table of contents ▼ 0:00 Nylon and Fluoro dogma 0:32 Contents of the rubbing experiment 1:13 Orthrus rubbing strength experiment 2:16 GTR Ultra rubbing strength experiment 3:31 Rubbing strength experiment of red spool 4:30 Fluoroline rubbing strength list 5:06 Nylon line rubbing strength list 5:28 Rubbing strength line ranking 6:59 Is the fluoro line stronger than the nylon line? 7:59 Is nylon stronger if it is the same thickness? 8:36 Summary and impressions Which is better, Fluoro line or Nylon line? Isn't the topic constant? I often hear the words "Fluoroline is more resistant to rubbing than nylon" and "Nylon is stronger for the same thickness". Is that true? I'm curious. I tried an experiment Conclusion. The experimental result shows that nylon has higher thread strength than fluoro. [Experimental content] As for the content of the experiment, I would like to check the rubbing strength of each line by shaving with a file and checking how many times it can be cut by repeating it 5 times and using the average value. [Fluoro rubbing strength ranking] 1st place R18 Fluoro Limited 8 times, 7 times, 12 times, 13 times, 7 times Average 9.4 times 2nd place FC Sniper 9 times, 7 times, 7 times, 9 times, 9 times Average 8.2 times 3rd place Red spool 3 times, 13 times, 11 times, 5 times, 4 times 7.2 times 4th place GTR Fluoro 8 times, 12 times, 3 times, 6 times, 6 times Average 7.0 times 5th place Orthrus 8 times, 2 times, 6 times, 7 times, 11 times Average 6.8 times 6th place Bus X Fluoro 7 times, 4 times, 10 times, 5 times, 5 times Average 6.2 times 7th place Fluoromeister 2 times, 6 times, 6 times, 3 times, 6 times Average 4.6 times 8th place Monster Brave Z 6 times, 2 times, 3 times, 6 times, 2 times Average 3.8 [Nylon rubbing strength ranking] GTR Ultra 12 times, 7, 7, 10, 13 average 9.8 times Super GTR 8 times, 5 times, 6 times, 9 times, average 6.8 times Machine gun 8 times, 7 times, 5 times, 6 times, 6 times on average 6.4 Nogales 8 times, 6 times, 6 times, 6 times, 5 times on average 6.2 Justron 9 times, 5 times, 3 times, 9 times, 5 times Average 6.2 Tri-lean 6 times, 5 times, 8 times, 7 times, 5 times, average 6.2 CN500 3 times, 9 times, 9 times, 4 times, 5 times Average 6.0 [Line ranking resistant to rubbing] 1st place GTR Ultra 9.8 times on average It has stable rubbing strength and is weak after rubbing, but it takes time for a big scratch on the line, so it seems to stick and catch it. Since it is a nylon line, it floats easily on water and has moderate elongation, so it is suitable for scrolls and can be used around the cover. It seems good to use 20lb of. Even 20lb is nylon, so I'm happy that it's easy to cast. 2nd place R18 Fluoro Limited 9.4 times on average It has strength without blurring, and I felt that it would withstand even after rubbing and hangnail. It's a soft fluoro, so it's relatively easy to throw, but since it doesn't stretch much, I think it's easy to get the desired movement when doing lure action with a rod. Since the fluoro line sinks in the water, it is difficult to sink the line when fishing the bottom or to give caution to the fish because it is clear. In the low price range, nylon Jastron has an average of 6.2 times, CN500 fluoronylon has an average of 6 times, and Bus X Fluoro has 6.2 times, but I think it is subtle if it is said to be in the low price range. [Is Fluoro more resistant to rubbing than nylon? ] Looking at the best data for each, GTR Ultra was 9.8 times, R18 Fluoro Limited was 9.4 times, and nylon was about 5% stronger than Fluoro. In the low-priced line, nylon Justron was 6.2 times, Fluoro's Fluoromeister was 4.6 times, and nylon was stronger in the low-priced range. Summarizing each average value, the average value for the entire fluoro is 6.65 times, and the average value for the entire nylon is 6.8 times. This has been overturned by the conventional wisdom that "Fluoro is more resistant to threading than nylon." [Is nylon strong if it is the same thickness? ] What about the theory that nylon is stronger if it is the same thickness? Looking only at the good results of both GTR Ultra is 0.330 mm, 9.8 times on average R18 Fluoro 0.330 mm 9.4 times on average The thickness of the lines was the same, so "Nylon is stronger if the thickness is the same" applies. In the low price range Justron is 0.330, 6.2 times on average Fluoromeister is 0.330, average 4.6 times