🔥¡DIY BOMBA de AGUA Inteligente! Hazlo con ESP32, WIFI y Display💧

Take your home to the next level with this smart pumping system! 💧🚀 In this video, I'll show you how I transformed a conventional electric pump into a fully automated, grid-connected system. Using an ESP32, an ESP32-S3 display, and the MQTT protocol, we achieved precise control: ✅ Touchscreen on/off. ✅ Tank level automation (never run out of water). ✅ Programmable start and stop times. ✅ Remote control via MQTT protocol. All the code was developed in the Arduino IDE, demonstrating that you can create professional solutions with accessible tools. Ideal for home automation and smart home projects! Materials List: Microcontrollers: 1x ESP32 (for pump control) and 1x ESP32-S3 with integrated display (for the interface). Actuator: 5V or 12V relay module (capable of handling the load of your electric pump, usually 10A or more). Level Sensor: Magnetic float sensor or ultrasonic sensor (HC-SR04 or JSN-SR04T for greater water resistance). Communication: Access to a Wi-Fi network and an MQTT broker (this can be local, like Mosquitto on a Raspberry Pi, or free, like HiveMQ). Power: 5V power supply for the microcontrollers. Pump: The electric pump you already have installed. #esp32project #arduino #smarthome #WaterPump #wifi