Как сбросить ошибку в стиральной машине Beko (тестовый режим)

#washingmachinerepair #beko The test mode in the Beko washing machine is designed to diagnose the operation of the washing machine, as well as to determine the error code and reset it. In this video, you will see how to enter the test mode and reset the error. Error codes in the Beko washing machine: H1 - Problem with the thermistor, open or short circuit in the temperature sensor H2 - Open circuit of the heating element. Probably the heating element is out of order. H3 - The heating element is always on. This is a normal situation, the heating element should not behave like this. Check the temperature sensor. H4 - Short circuit in the inlet valve triac H5 - Open circuit of the drain pump. Check the drain pump for a malfunction. H6 - Short circuit in the motor triac H7 - Malfunction of the pressure (level) sensor - water. Check the pressure switch for a malfunction. H11 - Motor/tachometer open. Check for open circuit in the motor. E1 - NTC (temperature sensor) error. Check the thermistor E2 - Heater problem. E3 - Continuous heat flow. E4 - Washer does not fill with water. E5 - Water drain error. E6 - Motor error. E7 - Water level sensor error. E8 - Washer does not fill with water. E9 - Door lock defective. E10 - Door jammed. E11 - Motor error. E13 - Communication error between motor board and main board E17 - Excessive foam detected. E18 - Unbalanced load in the washing machine drum. If you are interested in spare parts for washing machines and other household appliances, you can use the Master Plus online store https://master-plus.com.ua/?ref=NP55C This store has a wide range of various spare parts. You can use my promo code NP55C and buy spare parts at a discount. A nice bonus for you :) https://master-plus.com.ua/?ref=NP55C Promo code - NP55C Facebook -   / 337693107521153