Como Fazer uma Gaivota - DIY How to Make a Seagull

Copy the seagull template on the blog - http://mariaamora2001.blogspot.com.br/ Copy the seagull template on the blog - http://mariaamora2001.blogspot.com.br/ ---------------------- 1 - MATERIALS Thick cardboard, 2mm thick, Paraná A piece of cardstock or thin cardboard White paint Orange paint White glue Nylon thread #40 1 50cm wooden stick +- 1 small hook 2 - Make 1 copy of the template on the blog. 3 - Glue the template onto the cardboard. 4 - Cut it out after it dries. 5 - Place a weight on top to flatten it. 6 - Draw the templates on the cardboard. 7 - Mark all the holes. 8 - Cut out 4 body parts and glue them together. 9 - Apply glue to the edges and let dry. 10 - Paint white until well covered. 11 - Sand to a smooth finish. 12 - For the body holes, use a very fine drill bit. 13 - Use a ruler to measure the middle of the wood. 14 - Cut two 80cm long strings. ENGLISH Make a copy of the template on the blog http://mariaamora2001.blogspot.com.br/ 1 - MATERIALS Thick cardboard with 2mm thick Paraná A thin piece of cardboard White paint Orange ink White glue Nylon #40 1 wooden stick 50cm + - 1 small hook 2 - Make a copy of the template on the blog. 3 - Glue the template on cardstock. 4 - Cut when dry. 5 - Place a weight on top to keep it flat. 6 - Draw on cardboard templates. 7 - Check all holes. 8 - Cut 4 body parts and paste. 9 - Apply glue to the edges let dry. 10 - Paint it white until it is well covered. 11 - Sand to give good finish. 12 - For the holes in the body, use a very fine drill. 13 - Use a ruler to measure the middle of the wood. 14 - Cut with 2 wires 80cm.