How an Emulsion Tube Actually Works
How does an emotion tube actually work? Nobody seems to know! After you watch this video. You will know! I'm Not A Mekanik! Just all DIY WARNING! Please note that I'm also assuming that your running with the correct jets on your IDF carbs! If you are not..... Do not mess with your emulsion tubes!!!!!!!! My fuel height setting is from the top of the edge of the bowl down to approx.. 32.00mm just barely touching the top edge of the fuel. If you are not there, adjust your float to get the fuel to the approximate 32.00mm in height to the top edge of the bowl. 2.0L Porsche engine jets 44IDF Carbs Idle Jet .52mm Main Jet 1.25mm Air Correction Jet 1.85mm Venturi 32mm
▶︎
Drilling The F11 Emulsion Tubes
▶︎
More IDF Tech Tips
▶︎
Carburetor Emulsion Tube Explained - How it works - What they do? (by Craig Kirkman)
▶︎
Weber carbs and velocity stacks - Resonance
▶︎
CARBURETOR EMULSIFIERS 🔥 like you've never seen them before 🔥
▶︎
32mm Venturi Myth Busted 44 IDF 2Liter
▶︎
Carburettor jetting - 3 - emulsion tubes
▶︎
VW Stalling at Idle? It’s Probably This
▶︎
The insides of Weber 48mm IDA's (upgrade's for better fueling)
▶︎
Carburetor well tubes and how they function-Rick's Shop
▶︎
IDF WEBER PROBLEM
▶︎
The Weber carburettor, size does matter and here is how and why
▶︎
Must Know Info For The China IDF Clone
▶︎
How Does a Carburetor Work? | Theory of Operation
▶︎
Inside A Cheap Knock-Off Chinese Amazon Carburetor - What You Need To Know
▶︎
The IDF Tip For The Day Cleaning The Idle Jets and Circuits
▶︎
Man Builds a FERRARI From an Abandoned CLASSIC | Start to Finish by @Home Built By Jeff
▶︎
VW Performance Bench Tuning DRLA & IDF Carburetors
▶︎
More Then You Ever Wanted To Know About Thermal Vacuum Switches
▶︎