How to calibrate & bind a Bluetti power station to your phone or iPad (this is an Elite 100v2)

This video has been made to show a friend how to set up her new Bluetti power station. These steps will work on all models. Calibration is recommended for all brands. This is my first video so expect it to be very amateurish. Apologies for blurred image at one point! It is not sponsored by Bluetti. Basic calibration steps: A) charge the unit to full from the state it arrived in. Use grid power NOT solar as it needs to charge without interruption. Check for & run any updates on the Bluetti app AND on the device you are calibrating. Keep the power station and phone within 5 feet of each other during the update of the power station. B) discharge it fully without power interruption. Start recharging straight away. C) recharge fully to 100%. If you don’t already have the Bluetti app you can get it by using the qr code on top of the device, from within the user manual or by going to the app store. Switch on bluetooth. Click on ‘add device’ and it will find it automatically. Bind it to the phone or ipad and look for any upgrades on the power station by clicking the 3 dots top right of it in the list. I highly recommend joining the Facebook Bluetti groups where you’ll get a lot of support, questions answered and find some smashing people. There are facebook groups for some specific power stations, for Europe, America, Australia, a complete Bluetti community. https://www.facebook.com/groups/bluettiukc... https://bluettipower.co.uk