eSun ePLA-LW (Lightweight PLA) for model airplanes - printability and strength tests

ePLA-LW is filament designed by eSun for drone parts or model airplanes since it's density may be less than half of the regular PLA. Density of the filament can be controlled by printing temperature. Above 220°C it starts foaming (expanding), so we can reduce extrusion rate, but the final volume will be the same. In this video I tested the printability and strength of this filament and compared to eSun PLA+. Link to product page: https://www.esun3d.net/products/500.html Where to buy: PLA-LW:(only USA) https://esun3dstore.com/products/esun... PLA+:(USA/ Europe )https://esun3dstore.com/collections/3... Mentioned website about density: https://kg-m3.com/ eSun PLA filaments test video:    • Testing eSun PLA filaments: PLA-ST vs PLA+...   All material testing videos: https://www.mytechfun.com/videos/stre... Some STL files used in this video can be downloaded from: https://www.mytechfun.com/video/116 Airplane model: https://www.thingiverse.com/thing:486... Contents: 0:00 About lightweight PLA 4:04 Unboxing 5:15 PrusaSlicer settings 5:06 3D printing (tube, 265°C) 7:09 eSun PLA+ for comparison 8:12 Weight measurement 8:50 Bending test (tube) 10:04 Layer adhesion test 11:38 Impact test 13:05 Tensile test 13:45 Printing on 240°C 14:37 Cura settings 15:09 Printing (tube 240°C) 16:12 Weight (all 3 test objects) 16:22 Tube breaking (240°C) 16:34 Tube breaking results (all 3) 17:11 Temperature test 18:22 Printing model airplane 20:02 Conclusions #lightweightpla #esunfilament #esun