Ironman 4x4 RAID Front Winch Bumper Suited For 3rd Gen 2022+ Toyota Tundra | Install Guide

Discover the Ultimate 3rd Gen Toyota Tundra Aftermarket Parts: RAID Front Winch Bumpers! Get your Ironman 4x4RAID Front Winch Bumper on your 3rd Gen Toyota Tundra here: https://ironman4x4america.com/exterio... Chapter Selection: 0:00 Intro 0:20 Safety tips 1:14 Drop down the active air dam 1:48 Remove factory front grill and bumper skin 5:41 Remove crash bar and active air dam 7:27 Remove air dam motor and relocate on the truck 14:39 Cut a gap in the active air dam motor housing for the hose to pass through and re-install active air dam 14:47 Install crush tub spacers if you have active grill louvers to provide clearance 15:00 Install nutserts, brackets, and recovery points 22:46 Install winch tray 25:43 Install L-brackets for oem plastics 26:25 Trim away splash plate and install winch 27:40 Remove active grill louvers from factory bumper 29:08 Remove parking sensors, unclip fog lights, and remove wire harness from factory bumper 30:42 Remove lower bumper plastics from the factory grill 32:44 Make your factory grill cut 36:42 Re-install lower grill support bracket 37:03 Re-install active grill louvers 38:10 Clip wire harness back into fog lights and install parking sensor wire extension harnesses 39:15 Re hook front adaptive radar cruise control plug 39:28 Factory wire harness management 40:25 Install parking sensor brackets into the Ironman 4x4 bumper 42:42 Install parking sensors 43:00 Unhook parking sensor wire harness from the sensor 43:20 Install flip up license plate bracket and fairlead 44:52 Install Ironman 4x4 light bar 47:46 Prep front bumper shell for install 49:08 Install factory grill 51:04 Fasten L-brackets to factory grill 51:39 Install front bumper shell 52:22 Hook up parking sensor wires 52:29 Set bumper up and drill pinning bolts 53:13 Lock down all your hardware 53:32 Outro SHOP NOW: https://ironman4x4america.com/exterio...