Broadcasting Phone Calls Using A Mixer Send

A lot of people ask me questions about broadcasting phone calls, so I'm making a very simple video to explain how to set up a very basic broadcasting system that allows you to make and receive phone calls, using your mixer's "send" inputs. Another thing I forgot to mention is that this particular mixer, which has TWO sends, can be used for two separate phone lines. So your cell phone could be hooked to Send #1, and your computer could be Send #2. Then those lines can talk to each other. The mixer is a Behringer Xenyx 1204USB. It's one of the mixers that I broadcasted my live shows on and used for podcasts for a few years. But any mixer with at least one "send" should work. https://www.amazon.com/s?k=Behringer+... The cute little red USB soundcard is a Behringer U-CONTROL UCA222. It's old and you probably can't buy them anymore. Don't go too cheap on your sound cards though. Cheap sound cards can sound terrible. Here's one that I currently use: https://www.amazon.com/s?k=Behringer+... The noise filters are called MPOW Ground Loop Noise Isolator. https://www.amazon.com/s?k=Ground+Loo... The microphone is a Radio Shack 33-128. Get a cheap dynamic microphone. Don't spend more than $50 to start out. https://www.amazon.com/s?k=dynamic+mi... The soundboard app that I'm using on that Android phone is called Custom Soundboard Creator. Make sure it's the one with the B&W 4-square logo, made by Hipxel. Here's a direct link to it. https://play.google.com/store/apps/de... My podcast is called The Snow Plow Show - http://snowplowshow.com/