PRISM SUPPLY | DIY Install | PS-41 Tail Light & Fender Mounting Bracket + Chop Your Sportster Fender

The vast majority of the parts we sell are specific to Harley-Davidson motorcycles. But, our tail lights and fender mounting brackets are universal! So, whether you have a H-D Sporty or an enduro desert runner, these directions will show you how to install our PS-41 Tail Light and Fender Mounting Bracket. The instructions will also translate to any of our tail lights / brackets. We also chop the fender on our shop Sportster, so pay attention to our trick for achieving a perfectly straight cut that looks like it could have come from the factory. Make sure you’re subscribed to our YouTube channel so you don’t miss any of our videos and let us know in the comment section what part you’d like to see us install next. Parts Used: PS-41 Tail Light https://prismmotorcycles.com/collecti... Fender Mounting Bracket https://prismmotorcycles.com/collecti... Tools Needed: Safety Glasses Cut Off Wheel Sander Belt Sander Masking Tape Sharpie Small Phillips Head Screwdriver Standard Phillips Head Screwdriver Center Punch Power Drill Center Drill Bit ¼” Drill Bit Loctite 7/16” Wrench Wire Cutters Wire Strippers Lighter Heat Shrink Multimeter Digital Caliper Razorblade Subscribe to Prism Supply on YouTube:    / @prismsupply   Subscribe to our Newsletter: https://manage.kmail-lists.com/subscr... Shop Prism Supply: https://prismmotorcycles.com/ Follow Prism Supply: Instagram:   / prismsupply_   Facebook:   / prismsupply   #prismsupply #DIY #tutorial #howto #install