Yamaha Vmax removing the carbs of this POWER Cruiser!

00:00 Intro with some pops of the vmax 00:20 Removing airbox of the vmax 01:07 Draining the fuel out of carbs 01:43 Remove plate to see throttle cables 02:28 Remove fuel line 02:38 Disconnect throttle cables Unscrew the 4 top bolts 03:45 Remove the carbs (they are hold firm in place) 04:16 Removing the carbs it self So this is the start of my new build series, I will film most of the things that are important and many people seem to struggle with. All pictures of the bike will be posted on my instagram. The bike is(was) running, needs to be painted/coated. It was not running that smooth tho. The bike was standing still for a couple of years. So im going to clean the carbs (not myself). Reinstall the carburators and Sync the carbs (later videos). Next to that the brakes are seized on one side on the front, so they need to be rebuild/replaced. I used this tutorial: https://v4musclebike.com/forums/showt... Dont forget to subscribe, like and leave a comment! Any questions don't hesitate to contact me in the comments on Facebook or Instagram! Instagram:   / kiwiiyt   Motor: Specs: ➖ 1200cc ➖ 140pk ➖ V-Boost ➖ Powercruiser ➖ 1990 Film Gear/Editing software: Helmet Camera: GoPro Hero 8 & External Mic Adaptor Back end Camera: GoPro Hero 5 Helmet Mic:Purple Panda Lavalier Helmet mount from ebay Adobe Premier Pro CC Riding Gear: Helmet: Shark D-Skwal Matt Black(L) Gloves: Alpinestars Celar V2 (XL) Under armor: AlpineStars bionic Plus Jacket: Alpinestars - - - - - - - - - - - - - - - -