Не остановились дворники AUDI A3 Решение

"Stuck" wipers in the off position. Approximately like this Approximately like this VIDEO    • Стеклоочистители audi a3 отзывы   I found out that one of the reasons could be a faulty relay (I have number 377) The problem is not worth a damn, a sore spot with wipers with relay 577; 377 is common. But everyone starts cleaning the relay, they see carbon deposits inside on the side of the case. But no one pays attention to the fact that the weight of the relay itself simply destroys the soldering of the input contacts of the entire relay, where they are soldered to the board. Use a magnifying glass to enlarge the soldering points of the input pins, and then you will see the problem. At first I also cleaned the relay, until I decided to use a magnifying glass to enlarge the soldering of the input pins (and there are a lot of them, both thick and thin).